SIGLENT SDM3055 Bedienungsanleitung PDF herunterladen (Seite 85)

Remote Manual SIGLENT

SDM3055/SDM3055A 84

[SENSe:]CAPacitance Subsystem

This subsystem is configured capacitance measurement.

Command Summary

[SENSe:]CAPacitance:NULL[:STATe]

[SENSe:]CAPacitance:NULL:VALue

[SENSe:]CAPacitance:NULL:VALue:AUTO

[SENSe:]CAPacitance:RANGe

[SENSe:]CAPacitance:RANGe:AUTO

2.9.33 [SENSe:]CAPacitance:NULL[:STATe] {ON|1|OFF|0}

[SENSe:]CAPacitance:NULL[:STATe]?

Enable or disable the zero function.

Parameter Typical Return

{ON|1|OFF|0}，default ON 0(OFF)or1(ON)

Use zero functions from the measured value minus 100 nf to configure the

capacitance measurement.Make and read two measurements,sent the results

to the output buffer of the instrument.

CONF:CAP

CAP:NULL:STAT ON;VAL 100nF

SAMP:COUN 2

READ?

Typical Response: +4.79899595E-10,+4.79906446E-10

 Enable the scaling function will also enable automatic zero value

choice.([SENSe:]Capacitance:{AC|DC}:NULL:VALue:AUTO ON).

 To set a fixedr eturn null,use this

command:[SENSe:]Capacitance:{AC|DC}:NULL:VALue.

 This parameter is set to its default value after a Factory Reset (*RST) or Instrument

Preset (SYSTem:PRESet).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 96 97

Keine Kommentare

SIGLENT SDM3055 Bedienungsanleitung Seite 85