SIGLENT SDM3055 Bedienungsanleitung PDF herunterladen (Seite 48)

SIGLENT Remote Manual

47 SDM3055/SDM3055A

2.8.1 MEASure:CONTinuity?

Sets all measurement parameters and trigger parameters to their default values for

continuity test and immediately triggers a measurement. The results are sent directly to

the instrument's output buffer.

Parameter Typical Return

（none） +9.84739065E+02

Configure the instrument for continuity measurements. Then make and read one

measurement:

MEAS:CONT?

 The range and resolution are fixed at 1 kΩ for continuity tests (a 2-wire resistance

measurement).

 The instrument beeps (if the beeper is enabled) for each measurement less than or

equal to the continuity threshold (≤10 Ω), and the actual resistance measurement

appears on the display.

 From 10 Ω to 1.2 kΩ, the instrument displays the actual resistance measurement with

no beep. Above 1.2 kΩ, the instrument displays "OPEN" with no beep.

 The FETCh?, READ?, and MEASure:CONTinuity? queries return the measured

resistance, regardless of its value.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 96 97

Keine Kommentare

SIGLENT SDM3055 Bedienungsanleitung Seite 48