SIGLENT SDM3055 Bedienungsanleitung PDF herunterladen (Seite 78)

SIGLENT Remote Manual

77 SDM3055/SDM3055A

[SENSe:]VOLTage Subsystem

This subsystem configures AC voltage measurements and DC voltage and ratio

measurements.

Command Summary

[SENSe:]VOLTage:{AC|DC}:NULL[:STATe]

[SENSe:]VOLTage:{AC|DC}:NULL:VALue

[SENSe:]VOLTage:{AC|DC}:NULL:VALue:AUTO

[SENSe:]VOLTage:{AC|DC}:RANGe

[SENSe:]VOLTage:{AC|DC}:RANGe:AUTO

[SENSe:]VOLTage[:DC]:NPLC

[SENSe]:VOLTage[:DC]:FILTer[:STATe]

[SENSe:]VOLTage[:DC]:IMPedance

2.9.25 [SENSe:] VOLTage:{AC|DC}:NULL[:STATe] {ON|1|OFF|0}

[SENSe:] VOLTage:{AC|DC}:NULL[:STATe]?

Enables or disables the null function for AC or DC voltage measurements.

Note:This parameter is not shared between AC and DC measurements. The parameters

are independent for ACand DC measurements.

Parameter Typical Return

{ON|1|OFF|0}，default OFF 0(OFF)or1(ON)

Configure AC voltage measurements, using the null function to subtract 100

mV from the measurements. Make and read two measurements:

CONF:VOLT:AC

VOLT:AC:NULL:STAT ON;VAL 100mV

SAMP:COUN 2

READ?

Typical Response： +1.03625390E+00,+1.03641200E+00

 Enabling the scaling function also enables automatic null value selection

([SENSe:]VOLTage: {AC|DC}:NULL:VALue:AUTO ON).

 To set a fixed null value, use this command:

[SENSe:]VOLTage:{AC|DC}:NULL:VALue.

 The instrument disables the null function after a Factory Reset (*RST), Instrument

Preset (SYSTem:PRESet), or CONFigure function.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 96 97

Keine Kommentare

SIGLENT SDM3055 Bedienungsanleitung Seite 78